Check out my Face Book page for updates and projects!
In the world of home improvement, there is usually more than one way to get the job done. Sometimes when you're up against a tight budget or a short deadline, you need to be creative. If you don't have the exact tool for the project, you can often make do with a bit of ingenuity and a few items that you may already have on hand. In this blog, I'm making a side by side comparison of my home-made miter saw table and a Dewalt miter saw stand. DIY Miter Saw Table Enter your email below to Request the assembly plans for this table! How I put together my miter saw table. (CLICK) The material list for the homemade chop saw table is very short! Two 2X4's and one 2X6, some 2" and 3" screws (drywall screws are perfectly fine). If you don't have a workbench to put this table, you can use two sawhorses, or even just use it on the floor. Of course it's much easier to have it at waist height, especially if you have a lot of cuts
Comments
Post a Comment